SKC Wood Punch Needle and Threader PN-008
- You can easily use the SKC wooden punch needle in your punch embroidery projects for a long time.
- It is easy to use.
- It is possible to make punch embroidery much more easily by using the threader in the package.
- The copper part of the punch needle is 5 mm thick and 3.5 cm long.
- The wooden part is 11.2 cm long.
How to use?
1- Insert the threader wire from the front of the punch needle until it comes out of the hole at the back of the needle.
2- Insert your thread into the punch needle using the threader.
3- Pull the threader back until the thread comes out of the tip of the punch needle.
4- Remove the thread from the threader.
5- Insert the threader wire through the tip from back to front.
6- Insert your thread into the punch needle using the threader.
7- Pull the thread back towards the tip of the needle.
8- Remove the thread from the threader to leave a tail of about 5cm.